Filter
Top Products
134
Chapter 7 Recording/Playing Back What You Play
Silencing a Specific Track
(Track Mute)
When the Rec/Play screen is displayed, the track button will
light to indicate a track in which a performance has been
recorded. By turning off these track buttons, you can
temporarily silence the sound. This is referred to as “Track
Mute.”
1. Touch <Song Select>.
The Song Select screen appears.
fig.07-31_50
2. In the screen, touch < >< > to select the song
that you wish to play back.
NOTE
Do not touch <Load> at this time.
3. Touch <Exit> to display the Rec/Play Screen.
fig.07-04_50
4. Press a track button that is lit, extinguishing the
button.
When you play back the performance, track buttons that
are not lighted will be muted (silenced).
fig.07-14
5. Press the track button once again (button lights).
The part that had been muted will return to normal and
will be heard.
■ Track Assignments When
Playing Commercial SMF Music
Files
When you playback without loading (p. 140) the SMF music
files.
When you first load and then playback the SMF music files.
Track button Channel
Rhythm [R] 10
Accomp [1] 1
Bass [2] 2
Lower [3] 3
Upper [4] 4
Solo [5] 5, 6, 7, 8, 9, 11, 12, 13, 14, 15, 16
Track button Channel
Rhythm [R] 10
Accomp [1] Performance data other than 2 and 10
Bass [2] 2
Lower [3]
Nothing (Performance data from the
ATELIER series can be recorded)
Upper [4]
Nothing (Performance data from the
ATELIER series can be recorded)
Solo [5]
Nothing (Performance data from the
ATELIER series can be recorded)
Min
Max
Min
Max
Min
Max
Min
Max