Filter
Top Products
97
Chapter 3 Using the Registration Buttons
Using Registrations Created on an
Earlier Model
Registrations that were created on the ATELIER series (AT-90/80/30) or
ATELIER-R series (AT-90R/80R/60R/30R/20R) can be used on the AT-
90S/80S/60S.
When using a set of registrations that was created on the AT-90/80/60
models, your registrations will be converted to work in the AT-90S/80S/60S
models and loaded into internal memory. When loading these registrations
the music style that was originally used can also be loaded into the [Disk]
button to complete the accurate reproduction of the original registration.
Recalling a registration that was created on the “AT-90/80/30”
1. Insert the floppy disk that contains Registrations created on
an earlier model of the ATELIER series.
2. Touch <Registration> on the Main screen.
The sub-window appears.
fig.03-04_55
3. Touch <Load>.
The Registration Load screen appears.
fig.03-05_55
This operation is not
necessary when recalling a
registration that was
created on a model in the
AT-R series.
You can also open the
Registration Load screen by
pressing the [Registration]
b
utton, without performing
steps 2 and 3.
Min
Max
Min
Max
Min
Max
Min
Max