Roland AT-300 Electronic Keyboard User Manual


 
114
Various Other Settings
You can mute (silence) individual channels of performance
data of SMF music files (commercially available).
1.
Press the [Utility] button.
2.
Press the Menu [ ] or [ ] button to select
“Channel Mute.”
3.
Press the Value [-] or [+] button to select the
channel that you wish to mute.
From the left, these are “1 Ch. (channel 1), 2 Ch. ... 15
Ch., and 16 Ch.”
fig.09-09
4.
Press the [Rec] button.
fig.09-10
The number will change to “–,” indicating that the
corresponding channel has been muted.
5.
Once again press the [Rec] button, and muting
will be canceled.
To return to the basic screen, press the [Utility] button.
Channel mute will be defeated when you
select different
performance data.
The basic pitch of an instrument is generally considered as the
pitch of the middle A note. The “Master Tune” parameter lets
you adjust this basic pitch to match the pitch of any other
instruments that are playing together with the ATELIER.
1.
Press the [Utility] button.
2.
Press the Menu [ ] or [ ] button to select
“Master Tune.”
3.
Press the Value [-] or [+] button to adjust the
basic pitch.
To return to the basic screen, press the [Utility] button.
By pressing the Value [+] and [-] buttons simultaneously, you
can restore the default setting (440.0 Hz).
This setting remains stored in memory even while power is
turned off.
Muting Individual Channels of
Performance Data (Channel Mute)
Other Settings
Adjust the Standard Pitch (Master Tune)
Settings
415.3Hz – 466.2Hz
(0.1 Hz units)
AT-100-300_e.book 114ページ 2008年5月7日 水曜日 午後3時33分