Filter
Top Products
62
Using the Registration Buttons
Here’s how to recall a previously saved Registration set from the User memory
or USB memory into the memory of the ATELIER. Registrations can be selected
in the following two ways.
Loading a Set of Registrations
You can load a “set” (a collection of settings for Registration buttons [1]–[8])
from Floppy disk, USB memory or User memory.
Loading an Individual Registration
Recall the settings of one of the Registration [1]–[8] buttons.
1.
If you want to load a registration from USB memory,
connect your USB memory to the external memory
connector.
2.
Press the [Registration] button to make the indicator light.
The Registration select screen appears.
3.
Press the [Media] button to select the desired media.
If you want to load from the registration of USB memory, select “Ext Memory.”
If you want to load from the registration of floppy disk, select “Disk.”
If you want to load from the registration of user memory, select “User.”
4.
Press the Value [-] or [+] button to select the Registration
that you wish to load into internal memory.
To cancel the procedure, press the [Registration] button.
5.
Press the [Load] button to execute loading.
When loading is complete, the Registration Select screen reappears.
Loading Previously Saved Registration Sets Into the ATELIER
Loading a Set of Registrations
NOTE
Be aware that when you load
Registrations from a USB
memory or user memory, the
Registrations that were
previously in internal memory
w
ill be lost. It is a good idea to
save important Registrations to
USB memory or user memory
(p. 60).
If you want to load a
registration from a floppy disk,
connect the floppy disk drive to
the external memory connector,
and insert the floppy disk
containing the registration into
the floppy disk drive.
AT-100-300_e.book 62 ページ ２００８年５月７日 水曜日 午後３時３３分