Filter
Top Products
20
Before You Start Playing
You can adjust the contrast of the screen.
1.
Turn the [LCD Contrast] knob (p. 121) located
at the bottom of the ATELIER to adjust the
contrast of the screen.
Songs you record on the ATELIER and registration sets you
create can be copied to separately available USB memory for
safekeeping. You can also copy songs to a floppy disk using a
separately sold floppy disk drive (p. 52, p. 65, p. 101).
You can also play back SMF music files saved on USB
memory or a floppy disk (p. 90).
Use USB memory and floppy disk drive available from
Roland. Proper operation cannot be guaranteed if other USB
device is used.
If you’re using new USB memory or floppy disk, you’ll need
to initialize (format) it on the ATELIER. For details, refer to
“Formatting a USB Memory (Format)” (p. 120).
1.
Connect the USB memory to the External
Memory connector.
931
Carefully insert the USB memory all the way in—until it is
firmly in place.
Rotating the External Memory
Connector Holder
The External Memory connector holder rotates 90 degrees left
and right. Rotating the External Memory connector holder
allows you to avoid damaging the connected external memory
if something happens to bump against it.
1.
Grasp the External Memory connector holder
and turn it 90 degrees to the left or right.
988
Security Slot ( )
http://www.kensington.com/
Be sure to grasp the External Memory connector holder itself
when rotating it. Never rotate the External Memory
connector holder by holding the connected external
memory.
Take care not to allow your fingers to become pinched
when rotating the External Memory connector holder.
Adjusting the Contrast of the
Screen
Using the External Memory
Connecting the USB Memory
Bright Dark
NOTE
External Memory
Holder
90 degrees
to the right
90 degrees
to the left
Security Slot
(Only for AT-300)
NOTE
NOTE
AT-100-300_e.book 20 ページ ２００８年５月７日 水曜日 午後３時３３分