Filter
Top Products
120
Various Other Settings
The process of preparing USB memory or floppy disks so that
they can be used with the ATELIER is called “initialization”
(formatting).
In certain cases, particularly with floppy disks, the media is
formatted for a specific type of device. If the media format
does not match the ATELIER’s, you will not be able to use that
media with the ATELIER.
1.
Connect the USB memory to the external
memory connector
If you want to initialize a floppy disk, connect your
floppy disk drive (sold separately) to the external
memory connector, and insert the floppy disk.
2.
Press the [Utility] button.
3.
Press the Menu [ ] and [ ] buttons to
select “Media Utility.”
4.
Press the [Rec] button.
5.
Press the Menu [ ] and [ ] buttons to
select “Format Media.”
fig.02-10.eps
6.
Press the [Rec] button.
The Format screen appears.
To cancel the procedure, press the [Reset] button.
7.
Press the [Rec] button to start formatting.
To return to the basic screen, press the [Utility] button.
Never attempt to remove the USB memory until formatting is
complete.
Formatting a USB Memory
(Format)
NOTE
AT-100-300_e.book 120ページ ２００８年５月７日 水曜日 午後３時３３分