Filter
Top Products
74
Error Messages
* External Media: USB memory, Floppy Disk, CD-ROM, etc.
Indication
Meaning
You can only read the music file. It can not be saved.
An error occurred during writing.
The external media’s protect tab may be in the “Protect” (writing prohibited) position, or the external media may not
yet be initialized.
No external media is inserted. Insert the external media and try again.
There is not sufficient free memory in the save destination. Either insert other external media or delete unneeded files
and try again.
An error occurred during reading. The external media may be corrupted.
Insert other external media and try again. Alternatively, you can initialize the external media.
The file is unreadable. The data format is not compatible with the DP990F.
Data was not called up in time for playback of the song. After waiting several seconds, you may be able to play back
the song by pressing the [ ] button again.
This audio format is not supported.
Please use 44.1 kHz 16-bit linear WAV format audio files.
The internal memory capacity of the DP990F is full.
The DP990F cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the amount of MIDI
data sent to the DP990F.
A MIDI cable has been disconnected. Connect it properly and securely.
A MIDI transmission error has occurred. Check the MIDI cable and connected MIDI device.
There may be a problem with the system. Repeat the procedure from the beginning. If it is not solved after you have
tried several times, contact the Roland service center.
The External Memory connector was subjected to excessive current. Make sure that there is no problem with the
external media, then turn the power off, then on again.
The Panel Lock function is on (p. 35).
The Twin Piano function is on (p. 29).
If you record a performance, then select a song before you’ve saved your recording, “dEL” will appear, flashing, in the
display (p. 41).
DP990F_e.book 74 ページ ２０１０年１月１４日 木曜日 午後１１時２９分