Roland FP-2 Electronic Keyboard User Manual


 
35
Chapter 3 Recording a Performance
7.
Press the [Rec] button or the [Play/Stop] button to stop
recording.
The indicators for the [Rec] and [Play/Stop] buttons are extinguished, and
recording stops.
Listening to the Recorded Performance
8.
Press the [Play/Stop] button.
Press the [Play/Stop] button again, and playback stops.
Recording a Performance Using Session Partner
You can also easily record session performances to the session partner.
fig.03-02
1.
Select the Tone or Rhythm to be played (p. 28-p. 32).
2.
Press the [Rec] button.
The [Rec] button’s indicator lights up, the [Play/Stop] button’s indicator
flashes, and the FP-2 is put into recording standby.
3.
Recording starts when you begin the performance with
Session Partner (p. 28, p. 31).
The Rhythm starts to play, while simultaneously recording begins.
4.
Press the [Play/Stop] button to stop recording.
Listening to the Recorded Performance
5.
Press the [Play/Stop] button.
Press the [Play/Stop] button again to stop playback.
About “USr” in the
Display
When recording is stopped,
the “ ” indication
changes to “ ” in the
display. The “.” in the
display indicates that there
is Performance material
already recorded.
2
4,5
3
For more on selecting tone
and Rhythm, refer to p. 14
and p. 29.
The demo song cannot be
played back while recorded
performance data remains
in the FP-2’s memory. Press
[Rec] button to delete the
performance data (p. 13).
For more information on
the different Rhythm and
Chord progression pattern,
refer to the “Rhythm List”
(p. 59) and “Chord
Progression Pattern List”
(p. 60).
If you want to record with
the chord progression
specified (p. 31), the chord
is specified with a key in
the left part of the
keyboard, and recording
begins.
FP-2_e.book 35 ページ 2004年11月26日 金曜日 午後4時25分