Filter
Top Products
51
Troubleshooting
Case Cause/What to do
No Power
Is the power cord properly connected?
(p. 8)
No Sound
Is the volume level of the FP-2 (p. 10) or
connected device turned all the way
down?
Are headphones plugged in?
Has a plug remained connected to the
Phones jack? (p. 10)
Is the Speaker switch to “ON”? (p. 7)
Is Local Off selected? When Local Control
is set to OFF, no sound is produced by
playing the keyboard. Set Local Control to
“ON”(p. 47).
Is the MIDI Out mode set to “4”? (p. 48)
No Sound (With a
MIDI Device
Connected)
Is the power to all devices turned on?
(p. 44)
Is the MIDI cable connected and plugged
in correctly? (p. 46)
Does the MIDI channel match the
connected instrument? (p. 47)
No Sound From
the Left Side
Is the [Chord Progression] button’s
indicator off? (p. 31)
No sound from the left side is produced if
the [Chord Progression] button’s indicator
is off while the Session Partner is playing.
Is V-LINK switched on (p. 49)? When V-
LINK is switched on, the twelve keys at the
left end of the keyboard are used to control
images, and no sounds are played with
these keys.
The Volume of the
Keyboard is Too
Low
Is the volume balance turned all the way
down? (p. 18)
Two Sounds are
Produced When
the Keyboard is
Played
Is the FP-2 in Dual Play? (p. 15)
When the FP-2 is connected to an external
sequencer, set it to the Local OFF mode
(p. 47). Alternatively, set SOFT THRU on
the sequencer to “OFF.”
Not All Sounds Are
Played
The FP-2 has a maximum polyphony of 64
voices. When playing together with a song
or Rhythm along with heavy use of the
damper pedal, the performance data may
exceed the number of available voices, and
as a result, some notes or sounds played on
the keyboard may not sound.
The
accompaniment
sounds when the
keys are played
Is the [Chord Progression] button’s
indicator off? (p. 31)
When the [Chord Progression] button’s
indicator is off, the Session Partner begins
if you finger a keyboard.
The Keyboard or
Song Register or
Pitch is Off
Have you set Transpose? (p. 24)
Are the settings for the Temperament
(p. 42) correct?
Is the setting for Master Tuning correct?
(p. 41)
Song Doesn’t Play
Back
Does “dEL” appear in the display? (p. 13)
The internal songs cannot be played back
while recorded performance data remains
in the FP-2’s memory. Try playing back the
song after deleting the performance data.
Only the Sound of
a Particular
Instrument in a
Song Does Not
Play
Is Track Mute on? (p. 13)
If the button’s light is out when you hold
down the [Play/Stop] button, the music on
that track is not heard. Press the track
button so the light is illuminated.
Cannot Record
Have you selected which of the Track
Buttons to be recorded? (p. 36)
Tempo of
Recorded Song or
Metronome is Off
When you select for recording an internal
song that features tempo changes, the
tempos of Performances recorded on other
tracks are altered along with these
changes. In addition, the Metronome
tempo is also changed the same way.
Recorded
Performance is
Erased
Performances that have been recorded are
erased when the power for the FP-2 is
turned off. Once erased, Performances
cannot be recovered.
The [Split] button’s
lindicator won’t go
out
Is the [Chord Progression] button’s
indicator off? (p. 31)
Effects Not
Applied
When the part to which the effects are
applied is assigned to the Lower Tone, the
effects are then not applied to the Upper
Tone (p. 41).
Reverb Remains
Even After Reverb
is Lifted
As the FP-2 piano sounds faithfully
reproduce the depth and reverberation of
actual acoustic pianos, reverberation may
still be audible even after the reverb effect
is removed from sounds.
Case Cause/What to do
FP-2_e.book 51 ページ ２００４年１１月２６日 金曜日 午後４時２５分