Filter
Top Products
41
Chapter 4 Other Functions
Setting the Part to Which
Effects Are Added
This specifies which part is to have priority when the effects
assigned to the Upper Tone and Lower Tone differ in Dual
Play(p. 15) or Split Play(p. 16).
1.
Switch to Function mode (p. 38), and press the
[Reverb] button.
fig.04-04
2.
Press the [-] or [+] button to select Upper or
Lower.
→
If same effects are assigned to the Upper Tone and Lower Tone,
the same effects are added to both of Tones.
Changing the Pitch of the
Lower Tone in Octave Steps
(Octave Shift)
You can change the pitch of the Lower Tone in Dual Play
(p. 15) and Split Play (p. 16) an octave at a time.
Altering the pitch in one-octave units in this way is called
“Octave Shift.”
For example, you can raise the pitch of the Lower Tone to the
same pitch of the Upper Tone in Split Play.
1.
Switch to Function mode (p. 38), and press the
[Split] button.
fig.04-04
2.
Press the [-] or [+] button to select the pitch.
The range of available pitch change spans from two
octaves higher to two octaves lower.
The pitch is lowered one octave each time the [-] button
is pressed, while each press of the [+] button raises the
pitch by one octave.
To return to the original pitch, press the [-] and [+]
buttons simultaneously.
Tuning to Other Instruments’
Pitches (Master Tuning)
When playing ensemble with other instruments and in other
such instances, you can match the standard pitch to another
instrument.
The standard pitch generally refers to the pitch of the note
that’s played when you finger the middle A key. For a
cleaner ensemble sound while performing with one or more
other instruments, ensure that each instrument’s basic pitch
is in tune with that of the other instruments. This tuning of
all the instruments to a standard pitch is called “master
tuning.”
When the instrument is turned on, the standard pitch is set to
“440.0 Hz.”
1.
Switch to Function mode (p. 38), and press the
[Piano] button.
fig.04-05
The last three digits of the current standard pitch setting
appear in the display.
2.
Press the [-] or [+] button to change the standard
pitch.
You can set the standard pitch anywhere in a range of
415.3 Hz to 466.2 Hz.
The pitch is lowered 0.1 Hz each time the [-] button is
pressed. When the button is held down, the pitch drops
continuously.
The pitch is raised 0.1 Hz each time the [+] button is
pressed. When the button is held down, the pitch rises
continuously.
To return to the original pitch, press the [-] and [+]
buttons simultaneously.
Indication Description
-U-
(Upper)
Effects are added to the Upper Tone.
-L-
(Lower)
Effects are added to the Lower Tone.
FP-2_e.book 41 ページ ２００４年１１月２６日 金曜日 午後４時２５分