Filter
Top Products
40
Chapter 4 Other Functions
fig.04-02
■
Works of the Soft Pedal(FC2)
When the instrument is turned on, this is set to function as a
soft pedal.
1.
Switch to Function mode (p. 38), and press the
[Strings/Pad] button.
2.
Press the [-] or [+] button to select the pedal
function.
■
Works of the Sostenuto
Pedal(FC1)
When the instrument is turned on, this is set to function as a
sostenuto pedal.
1.
Switch to Function mode (p. 38), and press the
[Voice/GM2] button.
2.
Press the [-] or [+] button to select the pedal
function.
Changing the Effect Type
1.
Switch to Function mode (p. 38), and press the
[Effects] button.
The effect number appears in the display.
fig.01-22
2.
Press the [-] or [+] button to select the effect.
You can select from the following.
Indi-
cation
Effects Description
S.rE
SYMPATHETIC
RESONANCE
When you depress the damper
pedal on an acoustic piano, the
sound from the strings that
were struck resonates with
other strings, adding rich rever-
berations and broadness to the
sound.
Enh
ENHANCER
This controls the overtone
structure of the high frequen-
cies, adding sparkle and tight-
ness to the sound.
dLy
DELAY
This effect adds a delay sound
like an echo.
Cho
CHORUS
You can give the sound greater
dimension, with more fatness
and breath.
t.ch
TREMOLO
CHORUS
This effect is Chorus effect with
added cyclic modulation of vol-
ume.
rot
ROTARY
This effect adds spinning
sounds similar to the sound of
an organ using a rotating
speaker of the past.
Pha
PHASER
This effect adds a phase-shifted
sound to the direct sound, pro-
ducing a twisting modulation
that creates spaciousness and
depth.
FLn
FLANGER
This effect produces a metallic
resonance that rises and falls
like a jet airplane taking off or
landing.
Odr
OVERDRIVE
This effect creates a soft distor-
tion similar to that produced by
vacuum tube amplifiers.
dSt
DISTORTION
This effect produces a more
intense distortion than Over-
drive.
FP-2_e.book 40 ページ ２００４年１１月２６日 金曜日 午後４時２５分