Filter
Top Products
144
Connecting a CD Drive
(Sold Separately)
By connecting a commercially available CD drive that is USB-
compatible, you can use the FP-7 to play back ordinary music
CDs or songs from a CD-ROM that contains SMF music files.
The FP-7 provides a range of performance possibilities, such
as a “Center Cancel” function, which minimizes the vocal
portion of commercially available CDs so that you can sing the
vocal yourself, and a “Melody Guide” function, which mutes
the melody portion of SMF music files so that you can play it
yourself.
1.
Power off the FP-7 and the CD drive that you’ll
be connecting.
2.
Using the USB cable included with the CD
drive, connect the CD drive’s USB connector to
the FP-7’s external memory connector.
fig.cnct-cdrom2.eps
3.
Switch on the FP-7’s power.
4.
Switch on the power to the connected CD drive.
5.
Into the CD drive, insert a music CD or a CD-
ROM that contains SMF music files.
Go ahead and try playing SMF music files, songs from a
music CD, or audio files.
Turning the Power Off
If a song is playing, stop the song before you turn off the
power.
1.
Remove the CD from the CD drive.
* Firmly press the eject button of the CD drive.
* It may take some time for the CD to be ejected.
2.
Minimize the volume of the FP-7, and turn off
the power (p. 19).
3.
Power off the CD drive.
* Make sure that all power is switched off before
you unplug the CD drive cable.
Cautions when Using a CD
• CD-R/RW discs containing music tracks, or CDs that
contain both music tracks and data will not play
correctly.
• For playback of commercially available CDs, this
device supports playback only for discs bearing the
“COMPACT disc DIGITAL AUDIO” logo, which
indicates the official CD standard.
• We cannot guarantee that this device will correctly play
discs that do not comply with the CD standard, such as
music discs that use copy-protection technology.
For details on music discs that use copy-protection
technology, please contact the distributor of the disc.
• You cannot save songs on a CD or delete a song from
a CD, nor can you format a CD.
• For details on turning the power of the CD drive on or
off, inserting and removing CDs, and the types of
media that are recommended, refer to the owner’s
manual of your CD drive.
• “USB bus powered” units are not supported.
• CD drive models that have been verified to operate
correctly with the FP-7 are listed on the Roland website.
(www.roland.com)
If you’re unable to remove the CD
Proceed as follows.
If you are still unable to remove the CD, refer to the
owner’s manual of the CD drive.
1. Power off all devices.
2. Power off the FP-7.
3. Switch on the CD drive’s power.
4. Wait for a while after the power has turned on, and
then firmly press the eject button.
Making the Connections
External
Memory Connector
USB Cable
USB or
USB Mini
Connector
CD Drive
(Sold Separately)
FP-7-e.book 144 ページ ２００６年１２月１４日 木曜日 午前１０時５７分