Filter
Top Products
77
Playing Along with Rhythms
The song may not play back correctly if the performance is played with a different beat
than the one used in recording the original chord progression.
The recorded chord progression will be discarded as soon as the power is turned off. If
you want to keep it, you’ll need to save registration (p. 80).
When creating your own chord progression pattern, you can specify the number of
measures for the chord progression.
When you turn on the power, this is set to eight measures.
fig.Panel-Session-7.eps
1.
Hold down the [Session Partner] button and press the [Rec] button.
The following screen appears.
fig.d-UserChordProg.eps
2.
Press the [+] button.
The Select Measure screen appears.
The display will show the number of measures for which you will record a chord progression.
fig.d-RhythmMeasure.eps
3.
Use the [-] [+] buttons to select the desired number of measures.
You can choose 4, 8, 12, or 16 measures.
4.
Use the left side of the keyboard to specify a chord and begin recording.
Press the [Session Partner] button to stop recording.
Changing the Number of Measures of the Chord Progression You Record
FP-7-e.book 77 ページ ２００６年１２月１４日 木曜日 午前１０時５７分