Filter
Top Products
85
Saving Your Favorite Performance Settings
Here’s how an entire set of registrations you saved in internal memory or USB memory
can be loaded back to the [Registration] button.
Note that when you load a registration set, all of the settings that were stored at the
[Registration] button will be overwritten and lost.
If you want to load a registration set that was saved on USB memory, connect your
USB memory to the external memory connector. For more about handling USB
memory, refer to “Using USB Memory” (p. 23).
fig.Panel-RegistLoad.eps
1.
Press the [Function] button.
2.
Press the Track [R] button.
The Registration File screen appears.
3.
While holding down the [Display] button, use the [-] [+] buttons to select
“Load.”
fig.d-Registload.eps
4.
Press the [Display] button.
The Load Registration screen appears.
Loading a Registration Set You Saved
NOTE
NOTE
If no registration set has been saved in internal
memory, or if USB memory is not connected, the
“ ” icon will be shown for the Load field.
FP-7-e.book 85 ページ ２００６年１２月１４日 木曜日 午前１０時５７分