Filter
Top Products
174
Effects List
Stereo Delay1
Feedback 0– +80 % Adjusts the amount of the delay sound that’s fed back into the effect.
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the delay sound (W)
Stereo Delay2
Feedback 0– +80 % Adjusts the amount of the delay sound that’s fed back into the effect.
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the delay sound (W)
Stereo Delay3
Feedback 0– +80 % Adjusts the amount of the delay sound that’s fed back into the effect.
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the delay sound (W)
Stereo Delay4
Feedback 0– +80 % Adjusts the amount of the delay sound that’s fed back into the effect.
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the delay sound (W)
Stereo Delay5
Feedback 0– +80 % Adjusts the amount of the delay sound that’s fed back into the effect.
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the delay sound (W)
Monaural Delay
Delay Time note
Delay time from when the original sound is heard to when the delay
sound is heard (note)
Balance D100:0W–D0:100W Volume balance of the original sound (D) and delay sound (W)
Modulation
Delay
Depth 0–127 Depth of modulation
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the delay sound (W)
Triple Tap
Delay
Center Feedback 0– +80 % Adjusts the amount of the delay sound that’s fed back into the effect.
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the delay sound (W)
3D Delay
Center Feedback 0– +80 % Adjusts the proportion of the delay sound that is fed back into the effect.
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the effect sound (W)
Tape Echo
Repeat Rate 0–127
Tape speed
Increasing this value will shorten the spacing of the delayed sounds.
Echo Level 0–127 Volume of the echo sound
Reverse Delay
Delay Time 1–1270 ms
Delay time from when sound is input into the reverse delay until the
delay sound is heard (Hz)
Balance D100:0W–D0:100W Volume balance of the original sound (D) and delay sound (W)
Lo-Fi
(LoFi Compress)
LoFi Type 1–9
Degrades the sound quality. The sound quality grows poorer as this
value is increased.
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the effect sound (W)
Telephone
Voice Quality 0–15 Audio quality of the telephone voice
Balance D100:0–D0:100W Volume balance between the direct sound (D) and the effect sound (W)
Gate Reverb
Type
Normal, Reverse,
Sweep1, Sweep2
Type of reverb
Normal: conventional gated reverb
Reverse: backwards reverb
Sweep1: the reverberant sound moves from right to left
Sweep2: the reverberant sound moves from left to right
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the reverb sound (W)
OD–>Chorus
(Overdrive–>
Chorus)
Chorus Rate 0.05–10.00 Hz Frequency of modulation (Hz)
Cho. Balance D100:0W–D0:100W
Adjusts the volume balance between the sound that is sent through the
chorus (W) and the sound that is not sent through the chorus (D).
OD–>Flanger
(Overdrive–>
Flanger)
Flanger Rate 0.05–10.00 Hz Frequency of modulation (Hz)
Fl. Balance D100:0W–D0:100W
Adjusts the volume balance between the sound that is sent through the
flanger (W) and the sound that is not sent through the flanger (D).
Overdrive–>
Delay
Drive 0–127
Degree of distortion
Also changes the volume.
Delay Balance D100:0W–D0:100W
Adjusts the volume balance between the sound that is sent through the
delay (W) and the sound that is not sent through the delay (D).
Dist.–>Chorus
(Distortion–>
Chorus)
Chorus Rate 0.05-10.00 Hz Frequency of modulation (Hz)
Cho. Balance D100:0W-D0:100W
Adjusts the volume balance between the sound that is sent through the
chorus (W) and the sound that is not sent through the chorus (D).
Effect Name
Parameter Value Description
FP-7-e.book 174 ページ ２００６年１２月１４日 木曜日 午前１０時５７分