Filter
Top Products
Chapter 5. Changing Various Settings
27
ENGLISH
ENGLISH
ENGLISH ENGLISH ENGLISH ENGLISH
Applying the Damper Pedal
to the Left-hand Keyboard
Area
When you are using Split play (p. 17), you can apply the
damper pedal effect to the sound played by the left-hand
keyboard range.
If you press the [Organ] button in step 2 of Making Detailed
Settings (Function) (p. 25), a display like the following will
appear.
fig.disp-Off
Values
Power-up default setting OFF
Changing How Grand Space
is Applied (Grand Space
Mode)
If you press the [Grand Space] button in step 2 of Mak-
ing Detailed Settings (Function) (p. 25), a display like
the following will appear.
Values
Preventing the Settings from
Changing During Performance
■
Disabling Everything Except Piano Play
(Panel Lock)
The “Panel Lock” function locks the HP103e/102e in a state
where only piano performance can be used, and all buttons
will be disabled. This prevents the settings from being inad-
vertently modified even if children press the buttons acci-
dentally.
In the Panel Lock state, only the grand piano sound can be
played.
1.
Turn the volume to the minimum, and press the
[Power On] switch to turn off the power.
2.
Hold down the [Piano] button and press the
[Power On] switch to turn on the power.
The following display will appear.
fig.disp—-
All buttons are disabled.
Adjust the volume.
When you play the keyboard, the grand piano sound will
be heard.
To defeat the Panel Lock function, turn the volume down
to the minimum, and turn on the power once again.
■
Disabling the Buttons When Using a Tone
Other Than Piano (Tone Lock)
Even when using Tones other than the Piano, you can set the
instrument so all of its buttons are disabled (the settings in
effect at that time will be maintained). That way, you won't
get switched to the wrong settings if you inadvertently press
a few buttons while you’re playing.
1.
Hold down the [Demo] button and press the [Key
Touch] button.
The song or the metronome sound that is playing will
stop. The following will appear in the display:
All buttons are disabled while the instrument is set like this.
To cancel the Tone Lock function, once again hold down
the [Demo] button while you press the [Key Touch] but-
ton. Alternatively, you can lower the instrument’s vol-
ume all the way and switch its power off. Then, turn it on
again.
On The damper pedal effect will be applied to the
sound of the left and right hand keyboard
area.
OFF The damper pedal effect will not be applied to
the sound of the left-hand keyboard area.
Setting Descriptions
1
When the headphones are connected, the depth effect is
optimized for headphones, and when no headphones
are connected, the optimal depth for speakers is
applied.
2
The optimal depth for speakers is used, regardless of
whether or not headphones are connected.
Grand Space is also applied to the sound output from
the Output connectors, making this convenient when
you want to play through speakers connected to the
Output connectors.
3
The optimal depth for headphones is used, regardless
of whether or not headphones are connected.
HP103_e.book Page 27 Sunday, September 12, 2004 1:37 PM