Roland HP102e Electronic Keyboard User Manual


 
Chapter 6. Connecting External Devices
29
ENGLISH
ENGLISH
ENGLISH ENGLISH ENGLISH ENGLISH
Chapter 6. Connecting External Devices
Connecting to Audio
Equipment
You can connect audio devices to play the sound of the
HP103e/102e through the speakers of your audio system, or
to record your performance on a tape recorder or other
recording device.
When connecting, please use an audio cable with a standard
phone plug (sold separately).
Connection Examples
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing the sound of the HP103e/102e
through the speakers of an audio system/
Recording the performance of the HP103e/
102e on a recording device
Use the following procedure when turning on the power.
1.
Turn on the power of the HP103e/102e.
2.
Turn on the power of the connected device.
3.
Adjust the volume of each device.
* You can adjust the volume of a connected sound module with
the HP103e/102e.
When Recording HP103e/102e Performances on a
Recording Device
4.
Start recording with the connected device.
5.
Perform on the HP103e/102e.
6.
When the performance ends, stop recording on the
connected equipment.
Playing the sound of an audio device through
the speakers of the HP103e/102e
Use the following procedure when turning on the power.
1.
Turn on the power of the connected device.
2.
Turn on the power of the HP103e/102e.
3.
Adjust the volume of each device.
* You cannot use the HP103e/102e to adjust the volume of the
connected sound generating device.
Turning off the power
1.
Set the volume of the HP103e/102e and of the con-
nected devices to the minimum position.
2.
Turn off the power to the HP103e/102e.
3.
Turn off the connected equipment.
Connecting to a Computer
You can use a USB MIDI interface cable (sold separately) to
connect the HP103e/102e to your computer.
If the HP103e/102e is connected to a computer in which
sequencer software such as Rolands Visual MT is
installed, a song youve recorded on the HP103e/102e can be
saved on your computer.
Connection Examples
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
* In order to make connections to your computer, you must
install “MIDI driver” software on your computer. For details,
refer to the owner’s manual for your MIDI interface.
Use a USB MIDI interface cable to connect the USB con-
nector of your computer to the MIDI connectors of the
HP103e/102e.
fig.comp.e
Input R/L
(Line In, Aux In)
HP103e/102e
Output R/L
(Line Out, Aux Out)
HP103e/102e
MIDI IN
MIDI OUT
USB Connector of your
Computer
UM-1 etc.
Computer
HP103e/102e
HP103_e.book Page 29 Sunday, September 12, 2004 1:37 PM