Roland LX-15 Electronic Keyboard User Manual


 
Panel Descriptions
USB Memory Connector
If a USB ash drive is connected, you can use it to save
or play back songs.
You can do the
following things using a USB ash drive.
• WAVE les or MIDI les (SMF) data copied from your computer
can be played back by the LX-15.
• You can make audio recordings of your performances on the
LX-15.
• The audio recordings of songs that you’ve made can be played on
your computer, or burned to a CD.
* Carefully insert the USB ash drives all the way in-until it is rmly
in place.
* Use a USB ash drive sold by Roland. We cannot guarantee
operation if any other USB ash drive is used.
page 24 page 37
USB Connector
If you use a commercially available USB cable to connect the
LX-15’s USB connector to your computer’s USB connector, you’ll be
able to do the following things.
SMF data played back by MIDI-compatible
software can be sounded by the LX-15.
MIDI data can be transferred between
the LX-15 and your sequencer software,
opening up a wide range of possibilities for
music production and editing.
Input Jacks
If a digital audio player or other audio
playback device is connected here, you’ll
be able to listen to its playback through
the LX-15.
Use the controls of your audio playback
device to adjust the volume.
MIDI Connectors
You can connect these to external MIDI devices.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn o the power on all devices before making any
connections.
* When connection cables with resistors are used, the volume level of equipment connected to the Input jacks may be low. If this happens, use connection cables that
do not contain resistors.
AC In (AC Inlet)
Connect the included power
cord here.
Pedal Connector
Connect the pedal cord of
the dedicated stand to this
connector.
page 59
page 59
Output Jacks
If you connect these jacks to
amplied speakers, the sound of
LX-15 will be heard through them.
Rear side
Phones Jacks
Here you can connect headphones.
The LX-15 has two headphone jacks, two people can
also use headphones simultaneously.
Don’t forget to remove your headphone adaptor plug!
If you leave a headphone adaptor plug inserted in
the headphone jack, no sound will be heard from the
piano. If you don’t hear sound from the piano, check
the headphone jacks.
11
Operation Guide Panel Descriptions Before You Play Performing Practicing Piano Designer
Convenient Functions
Appendix
Function Mode