Filter
Top Products
Various Settings (Function Mode)
Indication Value Explanation
Center Pedal
Changing How the Pedals Work (Center Pedal)
When you turn on the power, the center pedal functions as the sostenuto pedal (p. 10).
You can change the function of the pedal to a variety of other operations.
Sostenuto
Sets function to sostenuto pedal.
* Selectable only for the center pedal.
Play/Stop
The pedal will have the same function as the [
] (Play/Stop) button.
Layer
Pressing the pedal will layer on Tone 2, used for Dual play.
* The Layer function can be applied only when using Dual play.
Octave
Pressing the pedal will layer on a sound one octave higher.
* The Octave function cannot be applied while using Twin Piano, Dual play, or Split play.
Local Control
Preventing Doubled Notes When Connected to a Sequencer
(Local Control)
When you have a MIDI sequencer connected, set this parameter to Local O.
Since most sequencers have their Thru function turned on, notes you play on the
keyboard may be sounded in duplicate, or get dropped. To prevent this, you can
enable the “Local O” setting so that the keyboard and internal sound generator will be
disconnected.
On
Local Control is on.
The keyboard and composer are connected to the internal sound generator.
O
Local Control is o.
The keyboard and composer are disconnected from the internal sound generator. Playing the keyboard will not produce sound.
MIDI Transmit Channel
MIDI Transmit Channel Settings (MIDI Transmit Channel)
This setting species the MIDI channel on which the LX-15 will transmit. MIDI uses sixteen
“MIDI channels,” which are numbered 1 through 16. By connecting MIDI devices and
specifying the appropriate MIDI channel for each device, you can play or select sounds on
those devices.
The LX-15 will receive all sixteen channels (1–16).
O, 1–16
MIDI
Sequencer
Local Control
Sound Generator
MIDI
In
MIDI
Out
How to save your settings?
Save your settings as described in “Memory
Backup” (p. 40).
46