Filter
Top Products
Practicing
Overdubbing the right hand
1.
Press the [ ] (Rec) button.
The [ ] (Rec) button will light, and
the LX-15 will enter recording-standby
mode.
At this time, New Song will be selected.
If you decide not to record, press the [
]
(Rec) button once again.
2. Reselect the song you saved earlier by pressing the [+] button.
MEMO
The song’s tempo and time signature will be as they were when you recorded the left hand.
3. Press the [Right] button so it’s blinking.
In this state, the right-hand performance will be recorded to the [Right] button. Leave the [Left] button lit.
NOTE
If you select a previously recorded part and then record, your new performance will overwrite that part; the previously recorded performance will
be lost.
4. Press the [ ] (Play/Stop) button.
A two-measure count will be heard (the measure number will be shown as “-2” then “-1” in the lower right of the display), and then recording will start.
The previously recorded performance for the left hand will be played back, so you can listen to it while you play the right-hand part.
When recording starts, the [
] (Rec) button and [ ] (Play/Stop) button will light.
MEMO
You can also initiate recording by playing the keyboard. In this case, the count will not sound.
5. Press the [ ] (Play/Stop) button.
Recording will stop, and a conrmation message will ask whether you want to save or delete the recording.
6. Either save the performance or erase it (p. 29).
4
12
5
3
31
Operation Guide Panel Descriptions Before You Play Performing Practicing Piano Designer
Convenient Functions
Appendix
Function Mode