Filter
Top Products
Various Settings (Function Mode)
Indication Value Explanation
Center Cancel
Playing Back an Audio File with Its Central Sound Minimized
(Center Cancel)
You can minimize the playback of sounds located in the center of the sound eld (e.g., vocals or melody instruments) of the selected audio le or
music from a digital audio player connected to the Input jacks.
* For some songs, sounds located in the center might not disappear completely, or the tone quality of the sound might be aected.
MEMO
You can also turn the Center Cancel function on/o by pressing the [Right] button.
On Sound at center reduced during playback.
O Normal playback.
Audio Transpose
Transposing an Audio File (Audio Transpose)
The selected audio le and the sound of a digital audio player connected to the Input jacks can both be transposed for playback.
* For some songs, an audio transpose setting other than 0 may aect the tone quality of the sound.
MEMO
You can also change this setting by holding down the [Transpose] button and using the [–] [+] buttons.
-6–0–5(semi-
tone units)
Positive (+) values raise the pitch in semitone steps, and negative (-) values lower the pitch in semitone steps.
Transpose Mode
Specifying What the Transpose will Aect (Transpose Mode)
This setting species what the transpose will aect.
You can use the transpose to change the pitch of both the song and the keyboard, the pitch
of only the song, or the pitch of only the keyboard.
Keyboard The sound of the keyboard
Song The song being played back and the sound being input via the Input jacks
Keyboard &
Song
The sound of the keyboard, the song being played back, and the sound being input via the Input jacks
Octave Shift
Changing the Pitch of the Tone in Octave Steps (Octave Shift)
You can change the pitch of the Tone 2 in Dual Play (p. 15) and Lower tone in Split Play (p. 16) an octave at a time.
Altering the pitch in one-octave units in this way is called “Octave Shift.”
For example, you can raise the pitch of the Lower Tone to the same pitch of the Upper Tone in Split Play.
-2–0–+2 (octave)
Recording Mode
Selecting the Format for Recording (Recording Mode)
You can choose whether to record as SMF or as audio.
MEMO
You can also switch the recording mode by holding down the [ ] (Rec) button and using the [–] [+] buttons.
SMF SMF parts will be recorded separately. This allows you to re-record just a single part, or to overdub dierent parts.
Audio The recording will be made as audio data. The recorded song can be used in your computer.
Damper Pedal Part
Changing How the Pedal Eects Are Applied (Damper Pedal Part)
When you press the damper pedal during Dual play or Split play, the pedal eect is normally
applied to both tones, but you can also select the tone to which the eect is to be applied.
Right & Left All enabled
Right Applied only to the Tone 1 (in dual mode)/Right-hand Tone (in split mode)
Left Applied only to the Tone 2 (in dual mode)/Left-hand Tone (in split mode)
How to save your settings?
Save your settings as described in “Memory
Backup” (p. 40).
How to save your settings?
Save your settings as described in “Memory
Backup” (p. 40).
45
Operation Guide Panel Descriptions Before You Play Performing Practicing Piano Designer
Convenient Functions
Appendix
Function Mode