Filter
Top Products
9
Turning the Power On and Off
Once the connections have been completed (p. 8), turn on power to your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
When S-MADI is used as REAC Split device, turn on the power to connected REAC Master device and Slave device first. Then turn on the power to
S-MADI. Refer to “REAC MAIN Indicator and SELECT Button“ (p. 12) for REAC mode setting.
1. Connect the peripheral devices.
Connect the MADI and REAC devices. Make the connection with the power turned off for all devices, including the S-MADI.
2. Turn on the power to the S-MADI.
Set the POWER switch on the unit’s front panel to ON to turn on the power to the S-MADI. The POWER indicator lights up when
the power comes on.
fig.power-on.eps
3. Turn on the power to the peripheral devices.
Turn on the power to the devices connected to the S-MADI.
1. Turn off the power to the peripheral devices.
Turn off the power to the devices connected to the S-MADI.
2. Turn off the power to the S-MADI.
Set the POWER switch on the unit’s front panel to OFF to turn off the power to the S-MADI. The POWER indicator goes dark when
the power is turned off.
* When making connections to other equipment, to prevent malfunction or damage to speakers or other devices, be sure to lower the volume all
the way before you switch on the power.
* After powering down all devices, detach the power sources.
* If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet.
Turning the Power On
Turning the Power Off