Filter
Top Products
51
Overview Basic Operation Adv. 1 (Kit) Adv. 2 (Phrase) Adv. 3 (Other) Appendix
Phrase Loop Settings (PHRASE LOOP SETUP)
Here’s how to make phrase loop settings.
1. Choose MENU Ú SETUP Ú SETUP (p. 16).
The PHRASE LOOP SETUP-SETUP screen appears.
[Knob 3] (–/+) edits the value.
[Knob 1] (SEL) selects
a parameter.
2. Turn [Knob 1] (SEL) to select a parameter.
3. Turn [Knob 3] (–/+) to edit the value.
Parameter Value Explanation
Default Measures 1–96, FREE The default Measures value shown in the SETUP screen
MEMO
If you’ve specied the desired values here, you
can simply press the [STANDBY] button and these
values will be shown in the phrase loop standby
screen.
Default Beat 1–9 The default Beat value shown in the SETUP screen.
Default Click OFF, ON The default Click value shown in the SETUP screen.
Part1 MIDI Ch
Part2 MIDI Ch
Part3 MIDI Ch
1–16, OFF
The MIDI channel of each part.
MEMO
MIDI channels for each pad outside of Phrase Loop mode are specied by “CH” (p. 63).
Tx Start/Stop OFF, ON If this is ON, the MIDI messages FA/FC will be transmitted when you start/stop the phrase loop.
Rx Start/Stop OFF, ON If this is ON, the MIDI messages FA/FC (start/stop) will be received in the Phrase Loop mode.
Metronome (Click) Sound Settings (PHRASE LOOP SETUP-CLICK)
Here’s how to choose the sound used by the metronome (click).
1. Choose MENU Ú SETUP Ú CLICK (p. 16).
The PHRASE LOOP SETUP-CLICK screen appears.
[Knob 3] (–/+) edits the value.
[Knob 1] (SEL) selects
a parameter.
Press [Button 3] (PREVIEW) to audition the click sound.
2. Turn [Knob 1] (SEL) to select a parameter.
3. Turn [Knob 3] (–/+) to edit the value.
Parameter Value Explanation
Sound (Inst Name) Type of click sound.
Volume 0–10 Volume of click sound.
Pan L15–CTR–R15 Pan setting of click sound. CTR is center.
1st Loop Only OFF, ON
If this is ON, the click sound will be heard only on the rst cycle of the phrase loop; it will not be
heard on the second and subsequent cycles.
* If nothing was recorded on the rst cycle, the click will be heard on the second cycle as well.
Phrase Loop and Metronome (Click) Sound Settings