Filter
Top Products
39
Chapter 3
[MIXER]
Chapter 3. Mixer Settings
Here you can adjust the volume, pan, etc.
fig.03-001_70
1.
Press [MIXER].
[MIXER] lights.
2.
Use [F1]–[F4] or [CURSOR (up/down)] to select
the parameter.
3.
Use [CURSOR (left/right)] or [RIM] to select the
instrument you wish to set.
You can also select the instrument by striking a pad.
4.
Use [+/-], [VALUE], or [CURSOR (up/down)] to
make the setting.
* Pressing [F5 (H & R)] in the [F1 (VOLUME)], [F2 (PAN)], or
[F3 (MIN VOL)] setting screen, you can choose to set the head
and rim simultaneously or individually.
5.
Press [EXIT] to return to the “DRUM KIT”
screen.
You can use the GROUP FADERS to make adjustments.
fig.03-002_70
1.
Press [INST] and [MIXER] simultaneously.
[MIXER] flashes.
You can change the function of the faders by holding
down [SHIFT] and pressing [MIXER]. When lower
indicator is lit, you can adjust the volume of AUX 1 and
AUX2.
2.
Press [F1]–[F3] to select the parameter.
3.
Move the fader which corresponds to the
TRIGGER INPUT you wish to adjust.
* You can also use [+/-], [VALUE], or [CURSOR (up/down)].
* These settings are always common to the head and rim.
4.
Press [EXIT] or [FADER] to return to the “DRUM
KIT” screen.
* After pressing [EXIT] or [FADER], the values for the
[GROUP FADERS] sliders may not reflect the actual volume
of the sound assigned to that fader. Be sure to move the faders a
bit before making your setting.
Mixer Parameters [MIXER]
Parameter Value Description
[F1 (VOLUME)]
Volume 0–127 Volume of each trigger input
[F2 (PAN)]
Pan L15–CTR–
R15
Pan of each trigger input
[F3 (MIN VOL)]
Minimum
Volume
0–10 Minimum volume of each
trigger input
(This is used to narrow the
dynamic range.)
[F4 (KIT VOL)]
Kit Volume
0–127 Volume of the entire drum
kit
Pedal HH
Volume
0–127 Volume of the hi-hat’s foot
closed sound
XStick Vol-
ume
0–127 Volume of cross stick sound
Using Group Faders to Edit (MIX EDIT)
Parameter Value Description
[F1 (VOLUME)]
Volume 0–127 Volume of each trigger input
[F2 (AMB SND)]
AMB SEND
LEVEL
0–127 Send level to the ambience for
each trigger input
[F3 (MFX SND)]
MFX SEND
LEVEL
0–127 Send level to the multi-effects
for each trigger input
TD-12_e.book 39 ページ ２００５年５月３１日 火曜日 午後１時３２分