Filter
Top Products
20
Preparations
■ Adjusting the Display Contrast
fig.01-14_50
The text or icons in the VS-2480/2480CD’s display (Operation
Display) may be difficult to read immediately after the unit is turned
on or after it has been used for long periods, or depending on the
environment in which the unit is used. If this occurs, rotate the
CONTRAST knob located at the left side of the display to adjust the
display contrast.
■ If You Do Not Understand the Display or Don’t Know
What to Do
fig.01-15
If an unfamiliar display appears or
if you do not know how you arrived
at the current condition, press
[HOME (DISPLAY)]. This will
return you to the initial power-on
screen, allowing you to re-do the
procedure from the beginning.
Mixer and Utility Parameters Initialize
You can restore the default parameter settings of a project. This is convenient when
you have made many changes to the Input Mixer, the Track Mixer, the Master Block,
as well as changes in the System Menu screens, and you want to quickly restore the
VS-2480/2480CD to its default settings.
• If you attempt to perform an incorrect operation or if the specified operation
cannot be executed, an error message will appear in the display. Please refer
to “Error Messages” (Appendices p. 9) and take the appropriate action.
• If the results are not as described in the User Guide or Owner’s Manual even
though you have followed the specified steps, please refer to
“Troubleshooting” (Appendices p. 5).
• If the information in “Troubleshooting” does not resolve the problem,
contact a nearby Roland Service Center or authorized Roland Distributor.
010
PHONES 2
010
PHONES 1
MONITOR
CONTRAST
Operating the CONTRAST
knob will not affect the
screen displayed by the
VGA monitor connected to
the VGA connector.
F4 F5 F6 HOME
DISPLAY
After initializing mixer and
system settings, many
settings will not be
affected. Some of the
settings that are not
affected by Mixer and
System Initialize include
project, Scene, tempo map,
and sync track data.
Additionally, the IDE
drive, SCSI ID, Scene
Mode, Shift Lock, and
Numerics Type settings are
not changed as a result of
Mixer/System Initialize.