Filter
Top Products
30
Listening to the Demo Performance
Listening to the Demo Performance with a
Different Arrangement (Scene)
Demo performance contain several completely different sets of settings for pan,
playback track, and effects etc. These settings are collectively called a scene. By
recalling different scenes or changing the scene while you playback a demo
performance, you can hear the demo performance arranged in different ways. Here’s
how you can listen to various arrangements of the demo.
fig.02-06_50
1. Press [STOP].
2. Press [SCENE]. [SCENE] indicator will light.
3. Hold [SHIFT] and press [BANK (SCENE)]. The numerics buttons ([0]–[9])
will blink (current BANK number will light).
4. Press the numerics buttons ([0]–[9]) to select the scene bank. For this
example, press [0]. Select the scene bank 0. Buttons [0]–[9] will light to
indicate the scenes that are registered in scene bank 0.
5. Of the [0]–[9] buttons, press any that has a lighted indicator. The scene will
be recalled, and the settings of the VS-2480/2480CD will change.
6. Press [PLAY]. The project will playback. Notice that the arrangement of the
demo performance is different.
7. Press [STOP]. Playback will stop.
8. Repeat step 2–7 to hear and compare various arrangements of the demo
performance.
For details refer to Owner’s
Manual “Using Digital
Mixer.”
SHUTTLE
32
0
/-
TAP
CLEAR
SNAPSHOT
ASSIGN
KNOB/FDR
NUMERICS
56
1
4
987
LOCATOR
JUMP
PREVIOUS NEXT
SCENE
AUTOMIX RECRESTARTSTORE
ZERO STOP PLAY REC
PROJECT ENDPROJECT TOP
SCRUB
EXT SYNC
TO THRU
FROM
PREVIEW
BANK AUX 7 AUX 8 USER
AUX 4 AUX 5 AUX 6 AUX 1
-
8
AUX 1 AUX 2 AUX 3
BANK
SHIFT
MARKER
YES NO
ENTER EXIT
ZOOM
LOCATOR / MARKER / SCENE
TIME / VALUE
/ /
SHUT / EJECT
+
+
1,7
2
3
4,5
6
If [SCENE] indicator is
already lighted, you may
skip steps 2.
If scene bank number 0 is
already selected, you may
skip steps 3–4.
Since there are ten scene
b
anks (0–9), and each of
them holds ten scenes,
numbered from 0 to 9, a
total of 100 scenes can be
registered.
To delete a previously
registered scene, press
[CLEAR] and then a
previously registered [0]–
[9] button (i.e., one whose
indicator is lit).
Please stop playback before
you switch scenes.
Scenes are registered for
numeric keys that are lit.