Filter
Top Products
15
The operating controls
Indications and displays on the
bodypack transmitter
Operation and battery status indication
The red LED LOW BATT/MUTE ¶ provides information
on the current operating state of the bodypack trans-
mitter:
Red LED off:
The bodypack transmitter is switched on and the capa-
city of the batteries/BA 2015 accupack is sufficient.
Red LED flashing:
The batteries are/the BA 2015 accupack is going flat
(LOW BATT).
In addition, the 4-step battery status display ቤ on the
display panel provides information on the remaining
battery/BA 2015 accupack capacity:
3 segments capacity approx. 100%
2 segments capacity approx. 70%
1 segments capacity approx. 30%
Battery icon flashing LOW BATT
AF peak indication
The yellow LED PEAK º lights up when the trans-
mitter’s audio input is overmodulated.
If the transmitter’s audio input level is excessively
high, the sound of the receivers may be distorted.
In order to avoid distortion in the receivers, reduce
the sensitivity of the transmitter’s line and/or micro-
phone input (see “Changing the sensitivity of the
bodypack transmitter’s line input” on page 41 and
“Changing the sensitivity of the bodypack transmit-
ter’s microphone input” on page 42).
LINE
CH 03
MIC
ቤ
º