Filter
Top Products
41
Using the components
Changing the sensitivity of the bodypack
transmitter’s line input
To adjust the sensitivity of the line input to match the
connected audio source:
̈ Make sure that the line input is switched on (see
previous section).
̈ Connect the external audio source, switch it on and
start playback.
̈ Press the SET button µ.
The operating menu appears and the first menu
item “CHAN” flashes on the display.
̈ Repeatedly press the ̆/̄ rocker button ¾ until
“SENSIT” flashes on the display and the LINE level
display ቦ appears.
̈ Press the SET button µ.
The current input sensitivity and the LINE level
display ቦ appear on the display.
̈ Press the ̆/̄ rocker button ¾ to change the
input sensitivity so that the LINE level display ቦ
shows full deflection during the loudest passages,
but the yellow LED PEAK º does not light up per-
manently.
̈ Press the SET button µ to permanently store the
setting.
“STORED” briefly appears on the display, indicating
that the sensitivity of the line input has been
stored.
LINE
CH 03
MIC
ቦ