Filter
Top Products
27
Putting the components into operation
Note:
Always charge the accupack in the charging
compartment ³ of the charging case (see “Charg-
ing the BA 2015 accupack” on page 33).
Inserting and replacing the batteries/accupack of
the bodypack transmitter
For powering the bodypack transmitter, you can
either use the rechargeable BA 2015 accupack ´ or
two 1.5 V AA size batteries. NB: Do not use any other
rechargeable batteries!
̈ Push the two battery compartment catches ƹ and
open the battery compartment cover ¿.
̈ Insert the BA 2015 accupack ´ or the batteries as
shown in the diagram on the left. Please observe
correct polarity when inserting the accupack/
batteries.
̈ Close the battery compartment cover ¿.
Connecting a microphone to the bodypack
transmitter
Note:
Suitable Sennheiser microphones are listed on
page 8.
̈ Connect the microphone to the microphone
input » of the bodypack transmitter.
̈ Lock the plug by screwing down the coupling ring.
̈ Adjust the sensitivity of the microphone input as
described on page 42.
ƹ
ƹ