Filter
Top Products
36
Using the components
̈ Make sure that the lock mode is deactivated
(see “Activating/deactivating the lock mode” on
page 45).
̈ Press the SET button.
The operating menu appears and the first menu
item “CHAN” flashes on the display.
̈ Press the SET button.
The current channel flashes on the display.
̈ Press ̆/̄ to change the channel.
If you press ̆, the display jumps to the next
channel; if you press ̄, the display jumps to the
previous channel.
By pressing and holding the ̆/̄ buttons, the
display cycles continuously (repeat function).
̈ Press the SET button to permanently store the
selected channel.
“STORED” briefly appears on the display. The body-
pack transmitter or the radio microphone now
transmits on the selected channel. The last menu
item selected is shown on the display.
To exit the operating menu:
̈ Use ̆/̄ to select the “EXIT” menu item and press
the SET button.
The standard display is shown.
Or:
̈ Press and hold the ON/OFF button until the stand-
ard display is shown.
PEAK
ON/OFF
ON/OFF
SET
SET
MUTE
LOW BATT
Radio microphone
Bodypack transmitter