Filter
Top Products
30
Using the components
Automatically switching the HDE 2020 D on/off
The receiver automatically switches on when you pull
the earbows ³ apart. The display » switches on.
When you release the earbows, the receiver switches
to standby mode (audio deactivated) and then
switches off after 2minutes.
Switching the EK 2020 D on/off
You can connect an induction loop or any pair of head-
phones with a 3.5 mm mono or stereo jack plug to the
headphone socket ² of the EK 2020 D. The head-
phone impedance must be 32 : or higher.
̈ Connect the 3.5 mm jack plug of your headphones
to the headphone socket of the EK 2020 D.
To switch the receiver on:
̈ Briefly press the ON/OFF button ´ .
The display » switches on.
To switch the receiver off:
̈ Press the ON/OFF button ´ for 3 seconds.
When you unplug the headphones from the receiver
or switch off the transmitter, the receiver automati-
cally switches off after 5 minutes.
Switching the charging case on/off
To switch the charging case on:
̈ Set the mains switch Ƹ to the position “I”.
The LED POWER ²
lights up.
To switch the charging case off:
̈ Set the mains switch Ƹ to the position “0”.
The LED POWER ² goes off.
»
´
»
²
Ƹ