Filter
Top Products
45
Using the components
Loading the factory-preset default settings
To load the factory-preset default settings of the
bodypack transmitter/radio microphone:
̈ Press the SET button.
The operating menu appears and the first menu
item “CHAN” flashes on the display.
̈ Repeatedly press ̆/̄ until “RESET” flashes on the
display.
̈ Press the SET button.
“RST.OK” flashes on the display.
̈ Press the SET button to load the factory-preset
default settings.
“DONE” briefly appears on the display. The body-
pack transmitter/radio microphone is reset to the
following factory-preset default settings:
• Channel: 1
• Line input: switched off
(bodypack transmitter only)
• Input sensitivity:
– Line input: –24 dB
(bodypack transmitter only)
– Microphone input: –12 dB
• Lock mode: deactivated
• Infra-red service interface: deactivated
Activating/deactivating the lock mode
The lock mode prevents the bodypack transmitter/
radio microphone from being accidentally pro-
grammed or switched off during operation.
PEAK
ON/OFF
ON/OFF
SET
SET
MUTE
LOW BATT
Radio microphone
Bodypack transmitter