Filter
Top Products
3
Features
The SRP-X700P is a versatile digital powered mixer that
incorporates an audio mixer, RGB/video switcher, processor
and power amplifier in the 3U rack size.
Built-in digital mixer
The digital mixer incorporates A/D and D/A converters operating at
24 bit/48 kHz sampling and a high-performance DSP. In addition to
the usual functions of conventional ordinary audio mixers, the
SRP-X700P offers functions such as a feedback reducer in the
independent channel and automatic mixing by using digital
technology.
Many audio input/output terminals
Six microphone input systems and two stereo line input systems
can be freely assigned to ten output systems.
Support for RGB/Component signals
The SRP-X700P is equipped with three composite/S video input
systems and three RGB/component input systems. This broad input
system eliminates need for a separate RGB switcher and video
switcher and enables simple system configuration. The SRP-X700P
supports high-resolution component signals such as 480 p and
1080 i, and also supports SXGA
1)
(1280 × 1024 pixels) of RGB
signals.
Built-in power-saving digital amplifier
A power amplifier of 150 W + 150 W (8 Ω) or 200 W + 200W
(4 Ω) is incorporated. The rated power consumption is almost half
that of the conventional amplifier. The SRP-X700P also supports
high impedance speakers 150 W (70 V LINE, 32 Ω).
Support for 5.1-channel audio input
4D and 4E INPUT terminals of LINE4 INPUT terminal support
5.1-channel audio input.
Useful external remote terminal
• RS-232C terminal
This terminal enables outside personal computer and system
controller to control various operations of the SRP-X700P. This
terminal can also be used to turn on the power of a Sony
projector and plasma display, or put it in STANDBY. It also can
be used to select the input signals.
• Equipped with Control S output terminal
Basic operations (playback, stop, fast forward, rewind, etc.) of
the Sony AV products are possible.
• Equipped with parallel input and output terminals
Input selection, volume control and scene control of the SRP-
X700P can be performed in the input terminal. Operation of
environment equipment such as screen and lighting, and the
status display of the SRP-X700P can be performed via the output
terminal.
Installation of two systems of 800 MHz band
wireless tuner units WRU-806B (option)
Mountable in the EIA standard 19-inch rack
(occupying 3U size)
Setting up and operating the SRP-X700P using the
supplied software
The CD-ROM supplied with the SRP-X700P contains two software
applications. One is the User Control Panel that enables an external
personal computer to perform basic operations (sound volume
adjustment, input selection and scene control) of the SRP-X700P
and also the basic operations (playback, stop, fast forward, rewind,
etc.) of a Sony DVD, VCR, CD and MD. The other is SRP-X700P
Manager, which enables you to perform internal settings of the
SRP-X700P.
1)
SXGA are registered trade marks of the International Business Machines
Corporation, U.S.A.
This unit can be used even without setting the parameters
by using the supplied SRP-X700P Manager software.
See page 15 for the default parameters when shipped from
the factory.
Features ......................................................................................... 3
Location and function of parts .................................................... 4
Front panel ................................................................................. 4
Rear panel .................................................................................. 6
Tuner Unit ................................................................................. 8
How to install the tuner unit ................................................. 8
How to remove the tuner unit ............................................... 8
How to Control the Display from the SRP-X700P .................... 9
PROJECTOR CONTROL RS-232C Terminal ........................... 9
PROJECTOR CONTROL CONTROL S IN/OUT Terminal...... 9
How to Control the SRP-X700P from External Equipment .... 9
REMOTE RS-232C Terminal ................................................... 9
REMOTE PARALLEL Terminal ........................................... 10
How to Control AV Equipment from the SRP-X700P............ 11
Connecting the Speaker ........................................................... 11
System Configuration................................................................. 12
System example when operating the SRP-X700P
with the default setting when shipped from the factory .......... 12
System example when external operation panel
and environment equipment are connected ............................. 13
System example when operating the SRP-X700P
from the REMOTE PARALLEL terminal .............................. 14
Default settings............................................................................ 15
Block Diagram ............................................................................ 17
Specifications .............................................................................. 18
Dimensions .................................................................................. 19
Troubleshooting .......................................................................... 20
ABOUT SUPPLIED CD-ROM
The supplied CD-ROM contains the two applications SRP-X700P
Manager and User Control Panel. In addition to the two
applications, the supplied CD-ROM contains the dedicated USB
driver software, the Control Software Manual and the SRP-X700P
Operating Instructions.
The Control Software Manual and the SRP-X700P Operating
Instructions are supplied as PDF files.
To open these files, Adobe Acrobat
Reader must be installed into
your PC.
To get Adobe Acrobat Reader, download from www.adobe.com
Microsoft and Windows are registered trademarks of Microsoft Corporation
(U.S.A. and other countries).
Adobe and Adobe Acrobat Reader are trademarks of the Adobe Systems
Incorporated.
Table of Contents