Filter
Top Products
9. AUXILIARY SENDS
These controls route the input channel signal to any one or
more Auxiliary busses. These are separate from the main
outputs and can therefore provide additional outputs for
foldback, echo units or extra loudspeaker ‘fills’.
AUX 1 & 2 are derived before the channel fader(PRE FADE),
and are therefore unaffected by the fader position. This
makes them particularly suitable for foldback or monitor
feeds, which need to be controlled separately from the main
P.A. mix.
AUX 3, 4 and 5 are derived after the channel fader(POST
FADE), and therefore follow any changes in fader level. They
are normally used to drive effects processing units which are
fed back into the mixer and which must fade out with the
input channel.
AUX 2 may be altered internally to be POST FADE. Refer to
the Selectable Options section (Page 28) for a description of
this modification.
All of the Aux Sends are muted when the ON switch(12) is
released.
20.0
15.0
10.0
5.0
0.0
-5.0
-10.0
-15.0
-20.0
20
1k 10k 20k
100
dB
Frequency/Hz
HF Section
20.0
15.0
10.0
5.0
0.0
-5.0
-10.0
-15.0
-20.0
20
1k 10k 20k
100
dB
Frequency/Hz
MID Section
Frequency Response Curves of the Equaliser
INPUT
Pa g e 13