Filter
Top Products
10. FADER
Linear faders are provided for precise and smooth level
control for each Stereo section.
GROUP SECTION
1 . RETURN
A mono Return is provided to each output Group, which is
intended for use as a sub-mix from another desk or as an
effects input. The input is electronically balanced on a
standard
1
⁄
4
" 3-pole ‘A’ gauge jack.
2 . I N SERT
An Insert is provided for each output Group to allow external
processing equipment to be ‘inserted’ into the output path.
The
1
⁄
4
" 3-pole ‘A’ gauge jacks are bypassed except when a
plug is inserted.
3 . RETURN LEV EL
The level of the signal at the RETURN input (1, above) is set
by a rotary control. A panel marking indicates the nominal
unity gain position.
4. PAN
The Group PAN control determines the position of the signal
within the stereo image which is routed to the mix L/ R busses
when L-R is pressed. Rotation fully anticlockwise feeds the
signal solely to the Left mix buss, while rotation clockwise
sweeps the image to the right.
5. PFL
When the PFL switch is pressed, the pre-fade Group signal is
fed to the headphones and RIGHT/PFL METER where it
replaces the mix signal. The AFL/PFL LED on the master
section illuminates to warn that the headphones and meter
are now responding to the AFL/ PFL selection and the PFL
LED on the Group lights to identify the active Group.
6. GROUP FADER
Long throw faders are provided for each Group with unity
gain at the top of their travel.
GROUP
Pa g e 17