Filter
Top Products
Selectable Options
Removal of +48V on Mic Inputs
To disable the +48V phantom powering on the microphone
inputs, remove link J3 from Input PCB SC3209. This can be
done without removing the PCB as shown below, by carefully
cutting the leads of the link above the PCB at the points
marked.
To reinstate the +48V, fit a replacement link, Part No. AZ2222,
which is available from your dealer.
C6
R19
R25
JSKT2JSKT1
INPUT BOARD SC3209
JSKT3
J3
C22
C4
C26
IC1
D3
R34
R24
R26
L5
CUT CUT
J3
Edge view of PCB
Pa g e 27