Filter
Top Products
3 – Automation overview : Displays
TASCAM DM-3200 Automation Guide 11
Rehearse
Rehearse is a special status that works with Write,
Trim and Static modes. Rehearse allows you to
practice or experiment with mix moves without
recording them.
Displays
The automation display screens on the DM-3200
described below are used for the following purposes:
• Enabling/disabling the automation system
• Setting operational preferences
• Setting the master Auto Fade Out time
• Displaying used/available memory
• Over-riding the automation system’s automatic
mode switching
• Copy/paste of configuration between channels
• Mix file management
In all automation displays, the cursor is moved by
using the cursor keys, located to the lower right of the
display.
AUTO SETUP
Check boxes are enabled/disabled by moving the cur-
sor to the check box and pressing the
ENTER key.
Time values are entered by moving the cursor to the
desired box, changing the value with the wheel then
pressing the
ENTER key. Time values flash until con-
firmed with the
ENTER key.
To access the automation displays, press the
AUTO-
MATION
key. Repeatedly pressing the AUTOMA-
TION
key (or using the POD 1 encoder and switch)
toggles between the displays.
AUTOMATION ENGINE This on-screen button
enables/disables the DM-3200’s automation system.
When enabled,
AUTO is displayed in the upper left of
the display with the currently selected channel, in all
mixer displays.
No automation data will be recorded or played back
when the automation system is disabled.
AUTO STORE The AUTO STORE option enables or
disables automatic storage of mix data.
When turned on, there are two sub-options:
OVER-
WRITE
, which throws away the previous mix data, and
KEEP, which keeps the previous mix data as a backup.
KEEP CONFIRMATION When enabled, a pop-up
box will ask for confirmation before performing a
Keep operation. A Keep operation saves a copy of the
current mix, pushing older mixes “down the stack”.
If all space for mixes is is taken, the Keep operation
will delete the oldest (unprotected) mix. All mixes
saved using Keep are numerically sequenced with
highest numbers being the latest mixes.
The default value of this check box is on (keep con-
firmation is enabled).
AUTOMATION MODE MULTI PASS Nor-
mally, the mixer exits Global Write or Global Trim
mode when it is no longer receiving timecode.
When this check box is enabled, the mixer remains in
Global Write or Global Trim mode until the mode is
manually disabled. This allows you to perform mix
Figure 3.2: AUTO SETUP screen