Filter
Top Products
PITCH LFO SECTION
LFO Frequency: The Pitch LFO Frequency value can be set between 0.1 and 10 Hz and
controls the rate at which the Pitch LFO oscillates.
Control Source: The Control Source selects between Internal LFO, Mod Wheel, Aftertouch, or
a combination of either Internal LFO and Mod Wheel or Internal LFO and Aftertouch.
Synch: This option provides a single, synchronized Pitch LFO across all regions. When Synch
is enabled, the LFO will be constant no matter what note is played or when it is struck. When
Synch is disabled, the LFO begins at the point in time when each individual note is struck and
will have its own “out of synch” and independent cycle. When Synch is enabled, the LFO cycle
will stay in synch for all the notes no matter when they are triggered.
Internal Depth: This parameter applies a fixed Pitch LFO depth that is always present when
“Internal” is selected as a Control source.
External Depth: An external MIDI continuous controller can also be used to control LFO
Depth. This setting works the same way as the Internal depth settings but you won’t hear its
effect until the assigned MIDI controller is engaged.
Note: The attack of the Pitch LFO is determined by the Pitch Envelope Attack time. In other
words, the Pitch LFO will not begin to oscillate until the Pitch Envelope has completed.
15