Filter
Top Products
MIC TO FX BUS ROUTING SECTION
33
The FX Bus Routing Matrix allows you to
independently route each microphone placement
contained within an impulse set to either the left or
right channel of the FX Bus. The routing section
also allows you to create simulated stereo signal
from a mono impulse response.
True Stereo: Limits the number of Mic Placements
to two and assigns one to the Left output channel
and the other to the Right output channel.
7-Channel: Allows for independent routing of each
mic placement within the FX Bus channels.
Simulated Stereo: Simulates a stereo signal from a mono source audio stream passing through
GigaPulse. When simulated stereo is enabled, GigaPulse will disable all but one microphone
placement. Because only one channel of convolution is used for Simulated Stereo, less CPU
resources are used than with Stereo Banks.
Width - Simulates the perceived width of the convolved signal from left to right.
Image - Simulates the perceived depth of the convolved signal from front to back by
creating extra voices and shifting them slightly temporally.