Filter
Top Products
3-29
Alert sound will be played on remote side if the option is enabled, alert sound has
been configured and the one of the above three alerts (motion/digital/video loss)
triggered.
NOTE: Above items may be disabled when the connected server doesn’t support the
features.
Recording Settings:
9 Name －
If you want to specify your own location name, specify it in this field. Otherwise,
leave this field with the default value “<Default>”. You will get a default location
name which concatenates the string in the server’s “Text on video” field with an
underline and the channel index.
9 Record # secs. before event －
Once the event recording is activated (using HSchedulingH) for channels, you can
use this setting to regulate the time for the recording of the triggered event. The
recording will start at the set time before the alert event starts.
9 Record # secs. after event －
This set how long the recording will last after the alert event triggered.
9 Media Type －
You can use this to specify which media type you want to record, Video, Audio, or
both. In some case that the connection contains only media data, the recorded
data will contains only media data though the choosen recording media type is
both. Similarly, if the choosen type is audio, and the connection has not audio data,
nothing will be recorded.
3.4.4 36BChanging the Camera Order in the List
You can use “drag and drop” in the grid area of the camera list to change the
sequence of the connected Video Server / Network Camera series products, as
shown in XFigure 3-9X. This is helpful when you want to rearrange the cameras’ order.