Filter
Top Products
01X Owner’s Manual
Remote Function List
107
Before UsingBasics SectionAppendix Getting StartedReference
[SAVE]
Executes the Save operation.
lights
[MARKER]
Turns the Marker on or off.
—
[SHIFT]+[MARKER]
Enters the Marker Option mode.
—
[r]
Press to continuously rewind. Press repeatedly to rewind more quickly. When the Marker
is turned on, this operation moves the song position to the previous Marker. When Nudge
is turned on, this operation moves the current object.
—
[f]
Press to continuously fast-forward. Press repeatedly to fast-forward more quickly. When
the Marker is turned on, this operation moves the song position to the next Marker. When
Nudge is turned on, this operation moves the current object.
—
[■]
Press to stop recording or playback. Pressing this when playback is stopped goes to the
top of the song.
—
[>]
Press to start playback.
lights
[●]
Press this to start recording. The [>] (Play) and [●] (Rec) lamp are turned on during
recording.
lights
[ZOOM]
Turns Zoom on and off.
lights
FOOT SWITCH 1
Playback/Stop
—
FOOT SWITCH 2
Punch-in/Punch-out
—
Dial
Scrub playback./Moves the song position. (See “SCRUB” below.)
—
[SCRUB]
Turns Scrub on and off. When Scrub is on, the dial can be used for Scrub playback.
When Scrub is off, the dial is used to move the song position.
lights
PAN mode [PAN] (Multi Channel View)
[PAN] ➝ [PAN] (Track Parameter View of PAN/SURROUND)
lights *28
DISPLAY [ / ]
Cursor [ / ]
(Multi Channel View)
Changes the parameter to be edited.
—
Knobs 1 – 8
(turning/turning ➝ pressing)
Edits the parameter. Tweak the Knob to select “Pan” or “Surround” so that the Pan/Sur-
round indication flashes, then press the Knob to actually select either of them.
—
Knobs 1 – 8 (pressing)
(Parameters other than Mode selection)
Resets the edited parameter to the default value.
—
EQ mode [EQ LOW]/[EQ LOW-MID]/[EQ HIGH-MID]/[EQ HIGH] (Multi Channel View)
[EQ LOW] ➝ [EQ LOW]/[EQ LOW-MID] ➝ [EQ LOW-MID]/[EQ HIGH-MID] ➝
[EQ HIGH-MID]/[EQ HIGH] ➝ [EQ HIGH] (Track Parameter View)
lights *10, 28
DISPLAY [ / ]
Cursor [ / ]
(Multi Channel View)
Changes the parameter to be edited.
—
DISPLAY [ / ]
Cursor [ / ]
(Track Parameter View)
Switches between EQ1/2 and EQ3/4.
—
Knobs 1 – 8 (turning)
For editing parameters.
—
Knobs 1 – 8 (pressing)
(when the edited parameter is Type)
Turns the EQ bypass on or off.
—
Knobs 1 – 8 (pressing)
(when the edited parameter is other than
Type)
Resets the parameter value to its default.
—
SEND mode [SEND] (Multi Channel View)
[SEND] ➝ [SEND] (Track Parameter View)
lights *11, 28
DISPLAY [ / ]
Cursor [ / ]
(Multi Channel View)
Changes the parameter to be edited.
—
DISPLAY [ / ]
Cursor [ / ]
(Track Parameter View)
Switches between SEND 1/2 and SEND 3/4.
—
Knobs 1 – 8
(turning/turning ➝ pressing)
For editing parameters. When setting the Send destination, turn the knob to select it on
Track Parameter View (indication flashes), then press the knob to actually enter the
selected setting.
—
Knobs 1 – 8 (pressing)
(when the edited parameter is Send Level)
Reset the parameter value to the default.
—
Knobs 1 – 8 (pressing)
(when the edited parameter is PRE/POST
or Mute)
Changes the setup.
—
PLUG-IN mode [SHIFT]+[PLUG-IN] (Multi Channel View)
[SHIFT]+[PLUG-IN] ➝ [SHIFT]+[PLUG-IN] (Track Parameter View)
lights *28
Knobs 1 – 8
(turning ➝ pressing)
Turn the knob to select the desired Plug-in for insertion (indication flashes), then press
the knob to actually enter the selected setting.
—
Knobs 1 – 8 (pressing)
(Knob to which the Plug-in is assigned)
Calls up the parameter page and displays the Editor window on Logic.
—
Knobs 1 – 8 (turning)
(Parameter page)
For editing parameters.
—
Button Function LED
Notes
(page 114)