16 Remote control
124 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section
3
In the PROGRAM CHANGE SETUP area at the
left of the screen, you can select the way in
which program changes will be transmitted
and received, and switch reception and trans-
mission on/off.
The MODE area of PROGRAM CHANGE SETUP lets
you choose one of the following as the way in which
program changes will be transmitted and received.
• SINGLE
If this button is on, program changes will be transmit-
ted/received on a single MIDI channel (Single mode).
• OMNI ON/OFF
If this button is on, program changes of all MIDI chan-
nels will be received in Single mode (this is unavailable
in Multi mode).
• BANK ON/OFF
If this button is on, bank select messages will be trans-
mitted and received in Single mode (this is unavailable
in Multi mode).
• MULTI
If this button is on, program changes will be transmit-
ted/received on multiple MIDI channels (Multi mode).
You can use the Tx (transmission) and Rx (reception)
buttons to turn program change transmission and
reception on/off separately.
4
In the MIDI SETUP area at the upper left of the
screen, select the port at which program
changes will be transmitted/received, and the
MIDI channel that will be used for transmis-
sion and reception. You have the following
choices.
Click the / buttons at the left and right of the Tx
box (transmission) or Rx box (reception) to change the
setting, and press the [ENTER] key (or click within the
box) to finalize the setting. If you select USB or SLOT
1–4, use the box at the right to specify the port number
(1–8) as well.
If SINGLE (single mode) is selected as the program
change transmission/reception mode, use the MIDI
CH field to select the MIDI transmit channel and MIDI
receive channel.
Hint
The MIDI port and MIDI channel used for program change
transmission/reception can also be specified from the MIDI
SETUP screen (
➥
p.188).
5
In the list at the right side of the screen, dis-
play the MIDI channel (bank) and program
number to which you want to assign an event,
and click that line.
This list lets you select the event (scene recall / effect
library recall) assigned to each program number.
The list contains the following columns.
• CH/BANK (Channel/Bank)
In Multi mode, or in Single mode when the BANK
ON/OFF button is off, the value in this column indi-
cates the MIDI channel on which program changes are
transmitted and received.
In Single mode when the BANK ON/OFF button is on,
the value in this column indicates the bank number.
• PGM No. (Program number)
Indicates the program number 1–128.
• LIBRARY NAME
In this column you can view/select the type and the
number of the event assigned to each channel (bank)/
program number.
Use the scroll bar at the right to display the desired
channel (bank) and program number, and click that
line; the line you click will move to the center and will
be highlighted.
6
Click the button in the LIBRARY NAME col-
umn of the currently selected line to open the
MIDI PGM CHANGE window.
MIDI The rear panel MIDI IN/OUT connectors
USB The rear panel USB connector
SLOT 1–4 An I/O card installed in rear panel slot 1–4