Yamaha DSP5D Music Mixer User Manual


 
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section 139
17
Using memory cards
If you select the SCENE MEMORY, HA, INPUT
PATCH, or OUTPUT PATCH items, you can specify
the starting number and ending number so that only
the desired range of scenes or library items will be
saved. The LINKED LIBRARY button is available only
if the SCENE MEMORY button is on.
Hint
The TOTAL SIZE field at the bottom of the MODE area indi-
cates the file size for the selected item(s). The available
capacity of the inserted memory card is shown below the file
list.
5
If you selected scenes or libraries for saving,
use the boxes at the right of the button to
specify the starting number and ending
number.
6
As necessary, use the file list to select the
directory (folder) in which you will save the
data.
If the file list contains a directory below the current
level, the TYPE column will indicate “[DIR].”
To move to a lower directory, click the directory line to
select it (that line will move to the center of the list),
and click the directory name shown in the FILE NAME
column.
If the file list contains a directory above the current
level, it will be shown as “. .” in the FILE NAME col-
umn and “[DIR]” in the TYPE column.
To move to a higher directory, click the directory line
to select it (that line will move to the center of the list),
and click the “. .” shown in the FILE NAME column.
Hint
The directory currently selected as the save destination is
also shown in the FILE PATH field above the list
If you want to create a new directory in the current location,
click the MAKE DIR button below the file list.
Note
The file list can display only up to one hundred items.
Saving is not possible if the FILE PATH field exceeds 60
characters (including the filename extension).
7
After specifying the item to be saved and the
save-destination directory, click the SAVE
button.
The FILE SAVE window will appear, allowing you to
assign a name to the data that will be saved.
8
Use the character palette to input a filename,
and click the OK button.
A window will ask you to confirm the Save operation.
Note
When assigning a name to a file on a memory card, lower-
case alphabetical characters and some symbols in the
character palette cannot be used.
If you paste text copied from another character palette when
inputting the file name, all lowercase alphabetical charac-
ters will be converted to uppercase.
OUTPUT EQ Contents of the output EQ library
GATE Contents of the gate library
COMP Contents of the compressor library
EFFECT Contents of the effect library
GEQ Contents of the GEQ library
SETUP Various settings not saved in a scene
USER DEFINED
KEY
User Defined key settings
DCA FADER
MODE
DCA fader mode settings
MIDI REMOTE MIDI remote settings
MIDI PGM TABLE
Contents of the list in the MIDI PGM
CHANGE screen
MIDI CTRL TABLE
Contents of the list in the MIDI CTRL
CHANGE screen
EVENT LIST
Contents of the list in the EVENT LIST
screen
Button Content
Starting number Ending number
Scene/library name
A directory below the current level
A directory above the current level