Filter
Top Products
Preventing accidental erasure
To prevent accidental erasure, slide the tab to the left to
open the hole. The tape cannot be recorded even if the
REC button is pressed. See Fig. A.
To allow recording on the tape again, slide the tab to
the right to close the hole. See Fig. B.
Handling digital audio tapes
Digital audio tapes are precisely constructed to record
and play back highly accurate data. Never open the
cassette lid and touch the tape. Touching the tape may
damaged it.
Do not use scratched, dirty or wrinkled tapes. Use of
such tapes may cause sound dropouts or damage the
head.
Storing digital audio tapes
Always keep tapes that are not in use in their cases.
Avoid storing tapes in direct sunlight, near heat
generating equipment or in humid locations.
Avoid storing tapes in dusty locations.
Do not store near strong magnetic fields (e.g. near
electric clocks, toys using magnets, etc.). Magnetic
fields will damage recordings.
Do not drop or subject the tape to strong vibrations.
Rewind the tape after use. If there is any slack in the
tape, rewind again.
Serial Copy Management System (SCMS)
Most digital sources contain a copy prohibit code. This
unit utilizes the serial copy management system that
permits digital-to-digital recording for at least one
generation.
Even when a tape which has been recorded from analog
sources is dubbed, this system regards the source as a
digital source containing the copy prohibit code since the
dubbing was performed through the A/D converter, and
permits digital-to-digital recording only for one generation.
14