Filter
Top Products
LOADING AND UNLOADING CASSETTES
Loading a cassette
1 Turn the POWER switch ON.
2 Press the OPEN/CLOSE button
to open the
cassette holder.
"OPEN" flashes on the display.
3 Place a DAT cassette in the cassette holder.
Be sure the window of the cassette faces you and the
slide tab faces you on the right side.
4 Press the OPEN/CLOSE button
again to close
the cassette holder.
Unloading the cassette
1 Press the OPEN/CLOSE button
to open the
cassette holder.
2 Remove the cassette from the cassette holder.
3 Press the OPEN/CLOSE button
again to close
the cassette holder.
NOTES:
The cassette holder will not close completely if the tape
is inserted improperly. In this case, press the OPEN/
CLOSE button
to open the cassette holder and
insert again.
If the cassette holder does not close completely, it will
automatically open after about 10 seconds even if the
OPEN/CLOSE button
is not pressed.
Do not attempt to open or close the cassette holder by
hand. Doing so will damage it.
15