Filter
Top Products
To skip undesirable sections-using the skip ID
When the unit encounters a skip ID signal, the tape fast-
forwards to the beginning of the next tune.
To write the skip ID signal
During playback, press the SKIP ID WRITE button at the
beginning of the section to be skipped.
The button lights. Playback stops temporarily and the skip
ID signal is written. (While writing, the SKIP-ID indicator
flashes.)
Skip playback
Set the SKIP PLAY button to the ON position.
When a skip ID signal is detected during playback, the tape
fast-forwards to the beginning of the next tune and
playback resumes.
When you want to play a tape containing a skip ID
signal without the skip play function, set the SKIP PLAY
button to the OFF position. The tape will be played
normally, but the skip ID signal is not erased.
To erase the skip ID signal
1 Set the SKIP PLAY button to the OFF position.
2 Play the tune which contains the skip ID to be
erased, and press the SKIP ID ERASE button when
the SKIP ID indicator lights.
The tape is rewound to the position where the skip ID
was written. The SKIP ID indicator flashes and the skip
ID is erased. Playback resumes after the skip ID is
erased.
27