Filter
Top Products
Display window
Remote control transmit indicator
Lights when the remote control transmitter is operated.
TOC (Table of Contents) indicator
Lights when a tape containing a TOC is played.
Tune number display
Indicates the tune number.
COUNTER indicator
Lights when the display is in counter mode.
ABS (Absolute time) indicator
Lights when the display shows ABS time (elapsed
playing time from the beginning of the tape).
Counter/ABS time/Tune playing time/Programmed
tune number display
Displays the tape counter reading, ABS time, tune
playing time (elapsed playing time from the beginning
of the current tune) or programmed tune number.
PROG indicator
Lights when the display shows the elapsed playing time
from the beginning of the current tune.
Sampling frequency indicators
Light according to the sampling frequency of the audio
signal.
DEW indicator
Appears when condensation occurs in this unit (drum,
head, etc.).
COPY PROHIBIT indicator
Appears when a recording cannot be performed with a
digital signal. In this case, record the source using the
ANALOG jacks.
WARNING indicator
If the head becomes excessively dirty, a signal read
error occurs during playback, and the sound cannot be
heard. At this time, the "WARNING" indicator appears.
If this occurs, use a commercially available digital audio
cleaning tape or have your Yamaha dealer clean the
head.
ST-ID/SKIP-ID/END-ID indicators
Light when the start ID, skip ID or end ID signal is
detected, or flashes when it is written or erased.
APMS (Automatic Programmable Music Selector)
indicator
Appears when programming or during program
playback.
APSS (Auto Program Search System) indicator
Appears when the beginning of a tune is searched for.
Peak level meter
Displays the recording level or playback level.
EMPHASIS indicator
Appears when tapes recorded with emphasis are
played, or when recording from a digital source on
which emphasis is applied. The emphasis function
reduces the noise of the high frequency revel by
boosting the high frequency level during recording
(Pre-emphasis function) and lowering it during
playback (De-emphasis function). This unit
incorporates only the de-emphasis circuit. You can
play or record emphasized signals but cannot newly
apply emphasis to signals.
Play indicator
Lights when the PLAY button is pressed.
Recording indicator
Lights when the REC button is pressed.
Pause indicator
Lights when the PAUSE button is pressed, or in record
stand-by mode.
Repeat indicator
Lights during repeat playback.
7