Filter
Top Products
8
—Owner’s Manual
Stereo Inputs
H
LEVEL controls
These rotary controls are used to adjust the level of the
stereo input signals that are input at the STEREO
INPUT jacks 5 and 6 or 7 and 8. These signals are
usually sent to the Stereo bus for mixing with Input
Channel 1–4 signals and tape signals.
Monitor/Master Section
I
MONITOR LEVEL control
This rotary control adjusts the level of the monitor
signal that is sent to the MONITOR OUT
m
and
PHONES
h
jacks.
J
Monitor select switch
This switch is used to select the signal source for the
MONITOR OUT
m
and PHONES
h
.
STEREO
... This position selects the Stereo bus and
allows you to monitor the STEREO
OUT signal.
ST+CUE
.... This position selects the Stereo bus and
the CUE bus as the monitor source.
CUE
........... This position selects the CUE bus as the
monitor source.
K
STEREO fader
Use this fader to adjust the level of the stereo signal
that is sent to the STEREO OUT jacks. Unity gain is
obtained when the fader is positioned about the 7–8
mark.
Unity gain
: See
7
Fader.
LEVEL
7L–8R
010
LEVEL
5L–6R
010
8
MONITOR/PHONES
STEREO
ST+CUE
CUE
STEREO
LEVEL
MIN MAX
10
9
8
7
6
5
4
3
2
1
0
9
J
K