Filter
Top Products
40
MIDI
MIDI data format
4.1.2.2 Hold1
This message controls sustain pedal on/off.
Control# Parameter Data Range Harmony ch Melody ch
64 Hold1 0…63, 64…127 ●● X
(OFF, ON)
When ON, currently-sounding notes will be sustained even after note-off is received.
4.1.2.3 NRPN (Non-registered parameter number)
This message is used to set sound parameters such as vibrato or detune, etc.
The NRPN MSB and NRPN LSB specify the parameter which is to be controlled, and subsequently Data Entry (refer to 1.2.1)
is used to set the value of the specified parameter. Only the MSB of Data Entry is recognized.
Control# Parameter Data Range Harmony ch Melody ch
98 NRPN LSB 0…127 ●● ●●
99 NRPN MSB 0…127
The following NRPN messages are recognized.
NRPN Data Entry
Parameter name and range of values Harmony ch Melody ch
MSB LSB MSB
00 00 mm Harmony Mute ●● X
mm : 00 - 63 (off), 64 - 127 (on)
01 08 mm Vibrato Rate Modulation ●● ●●
mm : 00 - 64 - 127 (0…127)
Melody channel is effective only when Gender is ON.
01 09 mm Vibrato Depth Modulation ●● ●●
mm : 00 - 64 - 127 (0…127)
Melody channel is effective only when Gender is ON.
01 10 mm Vibrato Delay Modulation ●● ●●
mm : 00 - 64 - 127 (0…127)
Melody channel is effective only when Gender is ON.
01 26 mm Detune Modulation ●● X
mm : 00 - 127 (0…127)
Controls the overall amount of detune specified for the
individual voice.
The following NRPN numbers independently control
the volume of each harmony note.
The currently-sounding harmony notes are numbered
sequentially beginning from the lowest note.
02 16 mm Harmony 1 Volume ●● X
mm : 00 - 127 (0…127)
02 17 mm Harmony 2 Volume ●● X
mm : 00 - 127 (0…127)
02 18 mm Harmony 3 Volume ●● X
mm : 00 - 127 (0…127)
The following NRPN numbers independently control
the panning of each harmony note.