Filter
Top Products
MIDI
41
MIDI data format
The currently-sounding harmony notes are numbered
sequentially beginning from the lowest note.
When the value is 0, panning will be random.
For random panning with Vocoder harmony, the pan
position will change at each key-on.
For random panning with Chordal harmony, the pan
position will change whenever the chord changes.
For Detune and Chromatic harmony, random pan will
not function, and the panning will be centered.
02 32 mm Harmony 1 Pan ●● X
mm : 00, 01 - 64 - 127
(random, Lch…center…Rch)
02 33 mm Harmony 2 Pan ●● X
mm : 00, 01 - 64 - 127
(random, Lch…center…Rch)
02 34 mm Harmony 3 Pan ●● X
mm : 00, 01 - 64 - 127
(random, Lch…center…Rch)
The following NRPN numbers independently control
the detune amount for each harmony sound.
The currently-sounding harmony notes are numbered
sequentially beginning from the lowest note.
02 48 mm Harmony 1 Detune ●● X
mm : 00 - 64 - 127 (-64…0…+63)
02 49 mm Harmony 2 Detune ●● X
mm : 00 - 64 - 127 (-64…0…+63)
02 50 mm Harmony 3 Detune ●● X
mm : 00 - 64 - 127 (-64…0…+63)
4.1.2.4 RPN (Registered Parameter Number)
This message is used to set Pitch Bend Sensitivity.
RPN MSB and RPN LSB are used to specify the parameter which is to be controlled, and subsequently Data Entry (refer to
1.2.1) is used to set the value of the specified parameter.
Only the MSB of Data Entry is recognized.
Control# Parameter Data Range
100 RPN LSB 0…127
101 RPN MSB 0…127
The following RPN numbers are recognized.
RPN Data Entry
Parameter name and range of values Harmony ch Melody ch
MSB LSB MSB
00 00 mm Pitch Bend Sensitivity ●● ●●
mm : 00 - 24 (0...24 semitones)
Settable in semitone steps over a two-octave range
127 127 -- RPN null ●● ●●
Set RPN and NRPN numbers to a condition in which
no numbers have been specified.
Internal settings will not be affected.
4.1.2.5 All Note Off
For Vocoder harmony, this message turns off all currently-sounding harmony notes.
Control# Parameter Data Range
123 All Note Off 0